Description
MicroDose 20mm Axial Coil Enail Kit
The 20mm banger is the best size for beginners because it has the right amount of surface area and efficiency for dabs that weigh between 0.1 and 0.2 grams. VapeBrat has two versions of its 20mm eNail kits to meet different needs. One has a barrel coil that only heats the sidewalls, and the other has an axial coil that wraps around both the bottom and the sides of the banger. The axial coil delivers stronger, more consistent heat and noticeably more powerful vaporization by making direct contact with more surface area.
The VapeBrat 20mm Micro eNail Kit is a smaller, easier-to-use version of the Micro 25mm Kit that works just as well. This setup takes the small size of the Copa Kit and adds the power and efficiency of a 20mm axial-style coil. The result is a perfectly balanced eNail that you can use every day.
The axial coil's design is what really sets it apart. The axial coil uses a bucket-style wire wrap that heats the sidewalls and bottom of the quartz banger evenly, unlike the barrel coil in the Copa Kit. This new version has a longer five-wrap design that spreads heat more evenly and makes the product work better. The end result is quicker heating times, more complete vaporization, and dabs that are always stronger and taste better.
This kit comes with a 20mm quartz eNail banger that is made just for it. Other VapeBrat kits may also come with a 20mm banger, but this one has a built-in quartz rod at the base that lets you use an O-clamp to hold the axial coil in place. This extra stability makes sure that the coils make good contact and work well, which is especially helpful for beginners or people who like smaller, more controlled dabs.
Because they are smaller, bangers don't always work with inserts very well. The VapeBrat comes with a 20mm Bubbler Spinner Carb Cap to fix this. This carb cap makes the air inside the banger spin, which evenly spreads your concentrate across the bottom surface. This lets you vaporize it smoothly and efficiently without the need for inserts.
The VapeBrat Micro Controller is what connects all the parts of the kit. This small controller has a clear digital display and easy-to-use up and down arrow buttons for precise temperature control. The power cord and push-button on/off switch are on the back, and the coil connects at the front. It's a great choice for anyone who wants a simple, reliable, and easy-to-use eNail setup.
Get rid of the torch and get the VapeBrat 20mm Micro Axial eNail Kit for more accuracy, consistency, and ease of use.
This kit comes with a 20mm enail banger and a new coil that gives your dabs the most power possible. This kit comes with a quartz banger that has a quartz rod at the bottom to hold your enail coil in place with an oclamp. Other VapeBrat enails may also use a 20mm banger. This size quartz banger is great for people who like smaller dabs or are just starting out with dabbing.
It's important to note that smaller quartz bangers usually don't work with a lot of inserts because their diameter is too small. But this banger comes with a 20mm Bubbler Spinner Carb Cap. This carb cap spins the air in your banger, making sure that your dab is evenly spread across the bottom surface for the best vaporization.
The VapeBrat Micro Controller is the real star of the show that makes this enail kit work. This enail controller has a clear digital display and two arrow buttons that let you change the temperature. The power cord goes to the back of the controller, next to the on/off button, and the enail coil goes to the front. This controller is very easy to use and understand for anyone who wants something simple.
Get rid of the torch! This curated email kit will take you into the world of Precise Temperature Control!
Specifications:
Micro Enail Controller Box:
- Temperature Range: 0 Degrees to 1000 Degrees
- Size: 5" x 3.5" x 1.5"
- Display: Flat Digital - Set Value
- Coil Connection: 5PIN Female XLR
- Temperature Precision: 0.2% FS
- Pin Set Up: PIN 1: TC+, PIN 2: TC-, PIN 3: Ground, PIN 4: AC, PIN 5: AC
- 1 Year Warranty on Controller Box
NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.
Bucket Enail Banger:
- Joint Size: 14mm
- Joint Angle: 90 Degree
- Joint Gender: Male
- Banger Bucket Diameter: 16mm
- Banger Bottom Diameter: 20mm
- Neck Connection: Regular Weld
- Top Style: Beveled Top
Bubble Spinner Carb Cap:
- Diameter: 20mm
- Insertable Diameter: 13mm
- Paired with: Bangers - Must be 20mm or Smaller
- Insert: 4mm Terp Pearls
- Bubble Style Carb Cap with Spinner Vortex Airflow
Enail Coil:
- Size: 20mm - Compatible with 20mm Diameter Bangers
- Coil Style: Axial
- Coil Material: Stainless Steel
- Sheath: Kevlar
- Thermocouple: K Type
- 30 Day Warranty on Enail Coil
Includes:
- 1 x VapeBrat Micro Enail Controller with Digital Display
- 1 x VapeBrat Bucket Enail Banger - 14mm Male 90 Degree 20mm Dia
- 1 x VapeBrat Spinner Bubble Carb Cap
- 1 x 20mm Axial Enail Coil
- 1 x Enail Power Cord
- 2 x Silicone Jars
- Instruction & Troubleshooting Manual
- ***DAB RIG NOT INCLUDED***
Key Highlights:
- 20mm axial coil heating bottom and sides,
- Optimized for 0.1–0.2g dabs,
- Five-wrap extended coil design,
- Quartz rod banger with O-clamp stability,
- Spinner carb cap for even airflow,
- User-friendly Micro Controller
